Cross Roller Guide

Cross Roller Guide

Cross Roller Guide SJA-LG45-1000-KLThe length of slider is 139.4mm, the width of slider is 120mm, the maximum dynamic load is 76.42KN, the maximum fixed load is 101.19KN, the Cross Roller Guide height is 38mm, the width of Cross Roller Guide bottom is 45mm, the Cross Roller Guide hole distance is 105mm, and the combined height of Cross Roller Guide and slide is 60mm.

Cross Roller Guide SJA-LG45-1000-KLThe length of slider is 139.4mm, the width of slider is 120mm, the maximum dynamic load is 76.42KN, the maximum fixed load is 101.19KN, the Cross Roller Guide height is 38mm, the width of Cross Roller Guide bottom is 45mm, the Cross Roller Guide hole distance is 105mm, and the combined height of Cross Roller Guide and slide is 60mm.

Q: Can you provide some videos of your factory ad the machine working?

A: Yes, please visit our website or contact with us to get it.

Q: What is the material of the linear Cross Roller Guide and what are the advantages?

A: Cross Roller Guide and slide block are usually made of high quality alloy steel, such as high carbon steel or medium carbon alloy steel, after a special heat treatment process, with high hardness, wear resistance and good corrosion resistance. The steel ball adopts precision grade bearing steel to ensure the rolling smoothness and high precision. This material combination enables our linear rail to withstand high load, long service life, and stable operation under a variety of complex conditions.

Q: If the equipment needs to run in a harsh environment, how to choose the linear Cross Roller Guide?

A: For harsh environments, such as high dust, moisture, and corrosive gases, we recommend using linear guides with a special protective design. For example, equipped with good sealing end caps and dust proof device to prevent dust and impurities; use stainless steel or special surface treatment guides to enhance corrosion resistance. At the same time, according to the specific environmental conditions, select the appropriate lubrication mode and lubricant, to ensure the normal operation of the linear Cross Roller Guide.

Q: What preparations should be done before the installation of the linear Cross Roller Guide?

A: Before installation, please ensure that the installation surface is clean and smooth, free of oil stains, iron chips and other impurities. At the same time, check whether the models and specifications of the Cross Roller Guide and slide match the equipment, and prepare appropriate installation tools, such as torque wrench, screwdriver, etc. In addition, the installation position and direction of the determined according to the installation drawings and instructions.

Q: How long is the lubrication cycle of the linear Cross Roller Guide, and how to lubricate it?

A: The lubrication cycle will vary according to the specific use conditions and environment. Generally, it is recommended to lubricate once for every operation [X] km or every other [X] months. For manual lubrication, you can use the grease gun to inject the appropriate amount of grease into the lubrication hole of the slide; for the automatic lubrication system, then replenish the grease regularly according to the system setting. During lubrication, pay attention to select the suitable lubricant and ensure adequate and uniform lubrication.

 

Hot Tags: cross roller guide, China cross roller guide manufacturers, suppliers, factory, cross roller guide way, linear roller way, guide rail roller, roller guideways, precision guide rails, Flanged Linear Ball Bearing

Send Inquiry

(0/10)

clearall